Elastic magnetic composites for energy storage flywheels
详细信息 查看全文
- 作者：James E. Martina ; jmartin@sandia.gov" class="auth_mail" title="E-mail the corresponding author ; Lauren E.S. Rohwera ; Joseph Stupak Jr.b
- 关键词：A. Particle-reinforcement ; A. Polymer-matrix composites (PMCs) ; B. Elasticity ; B. Electrical properties ; B. Magnetic properties
- 刊名：Composites Part B: Engineering
- 出版年：2016
- 出版时间：15 July 2016
- 年：2016
- 卷：97
- 期：Complete
- 页码：141-149
- 全文大小：2294 K
文摘
The bearings used in energy storage flywheels dissipate a significant amount of energy and can fail catastrophically. Magnetic bearings would both reduce energy dissipation and increase flywheel reliability. The component of magnetic bearing that creates lift is a magnetically soft material embedded into a rebate cut into top of the inner annulus of the flywheel. Because the flywheels stretch about 1% as they spin up, this magnetic material must also stretch and be more compliant than the flywheel itself, so it does not part from the flywheel during spin up. At the same time, the material needs to be sufficiently stiff that it does not significantly deform in the rebate and must have a sufficiently large magnetic permeability and saturation magnetization to provide the required lift. It must also have high electrical resistivity to prevent heating due to eddy currents. In this paper we investigate whether adequately magnetic, mechanically stiff composites that have the tensile elasticity, high electrical resistivity, permeability and saturation magnetism required for flywheel lift magnet applications can be fabricated. We find the best composites are those comprised of bidisperse Fe particles in the resin G/Flex 650. The primary limiting factor of such materials is the fatigue resistance to tensile strain.