Metallic microwires obtained as replicas of etched ion tracks in polymer matrixes: Microscopy and emission properties

详细信息    查看全文

• 作者：D.L. Zagorski ; S.A. Bedin ; V.A. Oleinikov ; N.B. Polyakov ; O.G. Rybalko ; B.V. Mchedlishvili
• 关键词：Track membranes ; Template synthesis ; Atomic-force microscopy ; Emission ; Mass spectrometry
• 刊名：Radiation Measurements
• 出版年：2009
• 出版时间：October-November 2009
• 年：2009
• 卷：44
• 期：9-10
• 页码：1123-1129
• 全文大小：899 K

文摘

Specially prepared porous matrixes (with through and dead-end pores of cylindrical or conical forms) were used as the templates for making ensembles of microwires. The process of electrodeposition of metal (Cu) into these pores was investigated. AFM technique was used for studying the “composite material” (metal microwires embedded into the polymer matrix). It was shown that the combination of different modes of AFM (tapping with phase-contrast mode, contact with lateral force mode) makes it possible to detect metal in the polymer matrix. Additional spread resistance mode in the contact regime allowed to measure the electrical conductivity of a single wire. The ensembles of free-standing microwires (metallic replicas of the pores obtained after removing of the polymer matrix) were used as the substrates (for deposition of the probe) for ion emission in the mass-spectrometer. It was shown that the intensity of formed ion beam increases with increasing of power of the laser pulse and with increasing of the mass of the probe. The intensity of mass-spectra signal on the power of laser pulse has a threshold character with saturation accompanied with the appearance of dimer ions. At the same time this intensity decreases with the increasing of the surface density of wires. The effect of degradation of wires during the laser pulse irradiation was found.