The effects of the chemical composition of titanate nanotubes and solvent type on 3-aminopropyltriethoxysilane grafting efficiency

详细信息    查看全文

• 作者：Patricia I. Pontó ; n^a ; ^{patriciapontonb@aluno.puc-rio.br" class="auth_mail} ; ^{ppattypponton@yahoo.com" class="auth_mail} ; José ; R.M. d&rsquo ; Almeida^a ; Bojan A. Marinkovic^a ; Slavica M. Savi膰^b ; Lidija Mancic^c ; Nicolá ; s A. Rey^d ; Edisson Morgado Jr.^e ; Fernando C. Rizzo^a
• 关键词：Functionalization ; Titanate nanotubes ; Silane coupling agents ; Sodium content ; Solvents
• 刊名：Applied Surface Science
• 出版年：15 May, 2014
• 年：2014
• 卷：301
• 期：Complete
• 页码：315-322
• 全文大小：3094 K

文摘

One of the major challenges in the development of nanocomposites based on a polymer matrix and highly polar ceramic nanofillers is the lack of the compatibility between these two components. In order to improve the chemical interaction between titanate nanotubes (TTNT) and polymer matrix, such as nylon 11,3-aminopropyltriethoxysilane (APTES) was grafted onto TTNT. The effects of the TTNT chemical composition i.e. sodium content and solvent type on the grafting silane efficiency were thoroughly studied through CHN elemental analysis, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), surface area and zeta potential measurements. The present study brings evidences supporting aqueous ethanol as more efficient reaction medium for TTNT functionalization with APTES, independent of the sodium content of nanotubes, when compared with pure water. It is also worth noting that within aqueous ethanol medium, TTNT with low sodium content are more efficiently grafted than TTNT with high sodium content. Successful APTES grafting decreases concentration of the hydroxyl groups on TTNT surfaces and enables its future application for the fabrication of nylon 11 nanocomposites.