Reactions between ozone and building products: Impact on primary and secondary emissions

详细信息    查看全文

• 作者：Mé ; lanie Nicolas ; Olivier Ramalho ; Franç ; ois Maupetit
• 关键词：Ozone ; Building products ; Secondary emissions ; Deposition velocity ; Indoor chemistry
• 刊名：Atmospheric Environment
• 出版年：2007
• 出版时间：May 2007
• 年：2007
• 卷：41
• 期：15
• 页码：3129-3138
• 全文大小：226 K

文摘

Reactions of ozone on common building products were studied in a dedicated emission test chamber system. Fourteen new and unused products were exposed to 100–160 ppb of ozone at 23 °C and 50 % RH during 48 h experiments. Ozone deposition velocities calculated at steady state were between 0.003 cm s⁻¹ (alkyd paint on polyester film) and 0.108 cm s⁻¹ (pine wood board). All tested product showed modified emissions when exposed to ozone and secondary emissions of several aldehydes were identified. Carpets and wall coverings emitted mainly C₅–C₁₀ n-aldehydes, typical by-products of surface reactions. Linoleum, polystyrene tiles and pine wood boards also showed increased emissions of formaldehyde, benzaldehyde and hexanal associated with reduced emissions of unsaturated compounds suggesting the occurrence of gas-phase reactions. The ozone removal on the different tested products was primarily associated with surface reactions. The relative contribution of gas-phase reactions to the total ozone removal was estimated to be between 5 % and 30 % for pine wood boards depending on relative humidity (RH) and on the incoming ozone concentration and 2 % for polystyrene tiles. On pine wood board, decreasing ozone deposition velocities were measured with increasing ozone concentrations and with RH increasing in the range 30–50 % .