Highly porous PEM fuel cell cathodes based on low density carbon aerogels as Pt-support: Experimental study of the mass-transport losses

详细信息    查看全文

• 作者：Julien Marie ; Regis Chenitz ; Marian Chatenet ; S ; rine Berthon-Fabry ; Nathalie Cornet ; Patrick Achard
• 关键词：PEM fuel cells ; Carbon aerogels ; Cathode ; Catalyst ; Platinum ; Transport losses
• 刊名：Journal of Power Sources
• 出版年：2009
• 出版时间：15 May 2009
• 年：2009
• 卷：190
• 期：2
• 页码：423-434
• 全文大小：1250 K

文摘

Carbon aerogels exhibiting high porous volumes and high surface areas, differentiated by their pore-size distributions were used as Pt-supports in the cathode catalytic layer of H₂/air-fed PEM fuel cell. The cathodes were tested as 50 cm² membrane electrode assemblies (MEAs). The porous structure of the synthesized catalytic layers was impacted by the nanostructure of the Pt-doped carbon aerogels (Pt/CAs). In this paper thus we present an experimental study aiming at establishing links between the porous structure of the cathode catalytic layers and the MEAs performances. For that purpose, the polarization curves of the MEAs were decomposed in 3 contributions: the kinetic loss, the ohmic loss and the mass-transport loss. We showed that the MEAs made with the different carbon aerogels had similar kinetic activities (low current density performance) but very different mass-transport voltage losses. It was found that the higher the pore-size of the initial carbon aerogel, the higher the mass-transport voltage losses. Supported by our porosimetry (N₂-adsorption and Hg-porosimetry) measurement, we interpret this apparent contradiction as the consequence of the more important Nafion penetration into the carbon aeorogel with larger pore-size. Indeed, the catalytic layers made from the larger pore-size carbon aerogel had lower porosities. We thus show in this work that carbon aerogels are materials with tailored nanostructured structure which can be used as model materials for experimentally testing the optimization of the PEM fuel cell catalytic layers.