Determination of polychlorinated biphenyls and organochlorine pesticides in small volumes of human blood by high-throughput on-line SPE-LVI-GC-HRMS

详细信息    查看全文

• 作者：J眉rgen Wittsiepe ; Marco Nestola ; Matthias Kohne ; Peter Zinn ; Michael Wilhelm
• 关键词：On-line solid phase extraction ; Large volume injection ; Gas chromatography ; Mass spectrometry ; Human blood ; Polychlorinated biphenyls ; Organochlorine pesticides
• 刊名：Journal of Chromatography B, Analytical Technologies in the Biomedical and Life Sciences
• 出版年：15 January, 2014
• 年：2014
• 卷：945-946
• 期：Complete
• 页码：217-224
• 全文大小：907 K

文摘

A fully automated and robust method featuring on-line solid-phase extraction (SPE) and large volume injection (LVI) gas chromatographic (GC) high resolution mass spectrometry (HRMS) is used to determine polychlorinated biphenyls (PCBs) and organochlorine pesticides, such as penta- and hexachlorobenzene (PeCBz, HxCBz), hexachlorocyclohexane isomers (HCH) and 4,4鈥?dichlorodiphenyldichloroethene (a metabolite of dichlorodiphenyltrichloroethane (DDT)), with only 200 渭l of human blood, serum or plasma. After spiking the sample with ¹³C-labeled internal standards and precipitating the proteins, the sample is passed through a 10 mm 脳 2.0 mm ID SPE cartridge filled with C18 material that adsorbs the analytes. After washing and drying, the cartridge is extracted with hexane/dodecane (99/1, v/v); the extract is directly injected into a LVI where GC/HRMS analysis follows. The fully automated system utilizes a robotic autosampler and a modular SPE system including two high-pressure syringe pumps, an automatic SPE cartridge exchanger unit and 6 switchable valves. All sample preparation steps are performed within 20 min during the GC run of a previous sample, limiting the throughput with only the GC runtime. The contents are quantified using the isotope dilution method. Due to laboratory air contamination problems, we achieved LOQs of 0.017 (PeCBz), 0.009 (HxCBz), 0.007 (HCH), 0.016 (DDE), while for the six indicator PCBs, we achieved values of 0.030 (PCB-28), 0.044 (PCB-52), 0.024 (PCB-101), 0.009 (PCB-138), 0.015 (PCB-153) and 0.008 (PCB-180) 渭g/l serum. Under clean laboratory air conditions, these values may be improved. This method is recommended when high throughput is desirable and/or only small amounts of material are available, such as during studies involving children.