Shear bond strength of porcelain laminate veneers to enamel, dentine and enamel-dentine complex bonded with different adhesive luting systems

详细信息    查看全文

• 作者：Elif Ö ; ztü ; rk^a ; ^{dtelifoz@gmail.com} ; Ş ; ü ; kran Bolay^b ; Reinhard Hickel^c ; Nicoleta Ilie^c
• 关键词：Porcelain laminate veneers ; Dentine exposure ; Adhesives
• 刊名：Journal of Dentistry
• 出版年：2013
• 出版时间：February, 2013
• 年：2013
• 卷：41
• 期：2
• 页码：97-105
• 全文大小：831 K

文摘

Objectives

The aim of this study was to evaluate the shear bond strength of porcelain laminate veneers to 3 different surfaces by means of enamel, dentine, and enamel-dentine complex.

Methods

One hundred thirty-five extracted human maxillary central teeth were used, and the teeth were randomly divided into 9 groups (n = 15). The teeth were prepared with 3 different levels for bonding surfaces of enamel (E), dentine (D), and enamel-dentine complex (E-D). Porcelain discs (IPS e.max Press, Ivoclar Vivadent) of 2 mm in thickness and 4 mm in diameter were luted to the tooth surfaces by using 2 light-curing (RelyX Veneer [RV], 3M ESPE; Variolink Veneer [VV], Ivoclar Vivadent) and a dual-curing (Variolink II [V2], Ivoclar Vivadent) adhesive systems according to the manufacturers¡¯ instructions. Shear bond strength test was performed in a universal testing machine at 0.5 mm/min until bonding failure. Failure modes were determined under a stereomicroscope, and fracture surfaces were evaluated with a scanning electron microscope. The data were statistically analysed (SPSS 17.0) (p = 0.05).

Results

Group RV-D exhibited the lowest bond strength value (5.42 ¡À 6.6 MPa). There was statistically no difference among RV-D, V2-D (13.78 ¡À 8.8 MPa) and VV-D (13.84 ¡À 6.2 MPa) groups (p > 0.05). Group VV-E exhibited the highest bond strength value (24.76 ¡À 8.8 MPa).

Conclusions

The type of tooth structure affected the shear bond strength of the porcelain laminate veneers to the 3 different types of tooth structures (enamel, dentine, and enamel-dentine complex).

Clinical significance

When dentine exposure is necessary during preparation, enough sound enamel must be protected as much as possible to maintain a good bonding; to obtain maximum bond strength, preparation margins should be on sound enamel.