Mineralogical, geochemical, and microbial investigation of a sulfide-rich tailings deposit characterized by neutral drainage

详细信息    查看全文

• 作者：Matthew B.J. Lindsay ; Peter D. Condon ; John L. Jambor ; Kerry G. Lear ; David W. Blowes ; Carol J. Ptacek
• 刊名：Applied Geochemistry
• 出版年：2009
• 出版时间：December 2009
• 年：2009
• 卷：24
• 期：12
• 页码：2212-2221
• 全文大小：712 K

文摘

Mineralogical, geochemical and microbial characterization of tailings solids from the Greens Creek Mine, Juneau, Alaska, was performed to evaluate mechanisms controlling aqueous geochemistry of near-neutral pH pore water and drainage. Core samples of the tailings were collected from five boreholes ranging from 7 to 26 m in depth. The majority of the 51 samples (77 % ) were collected from the vadose zone, which can extend >18 m below the tailings surface. Mineralogical investigation indicates that the occurrence of sulfide minerals follows the general order: pyrite [FeS₂] >> sphalerite [(Zn,Fe)S] > galena [PbS], tetrahedrite [(Fe,Zn,Cu,Ag)₁₂Sb₄S₁₃] > arsenopyrite [FeAsS] and chalcopyrite [CuFeS₂]. Pyrite constitutes <20 to >35 wt. % of the tailings mineral assemblage, whereas dolomite [CaMg(CO₃)₂] and calcite [CaCO₃] are present at 30 and 3 wt. % , respectively. The solid-phase geochemistry generally reflects the mineral assemblage. The presence of additional trace elements, including Cd, Cr, Co, Mo, Ni, Se and Tl, is attributed to substitution into sulfide phases. Results of acid–base accounting (ABA) underestimated both acid-generating potential (AP) and neutralization potential (NP). Recalculation of AP and NP based on solid-phase geochemistry and quantitative mineralogy yielded more representative results. Neutrophilic S-oxidizing bacteria (nSOB) and SO₄-reducing bacteria (SRB) are present with populations up to 10⁷ and 10⁵ cells g⁻¹, respectively. Acidophilic S-oxidizing bacteria (aSOB) and iron-reducing bacteria (IRB) were generally less abundant. Primary influences on aqueous geochemistry are sulfide oxidation and carbonate dissolution at the tailings surface, gypsum precipitation–dissolution reactions, as well as Fe reduction below the zone of sulfide oxidation. Pore-water pH values generally ranged from 6.5 to 7.5 near the tailings surface, and from approximately 7–8 below the oxidation zone. Elevated concentrations of dissolved SO₄, S₂O₃, Fe, Zn, As, Sb and Tl persisted under these conditions.