Numerical Heat Transfer Investigation in a Heat Exchanger Tube with Hexagonal Conical-ring Inserts

详细信息    查看全文

• 作者：Somchai Sripattanapipat^a ; Sombat Tamna^b ; Nuthvipa Jayranaiwachira^c ; Pongjet Promvonge^c ; ^{kpongjet@gmail.com}
• 关键词：Heat exchanger ; Heat transfer ; Conical ring ; Turbulent flow ; Vortex generator
• 刊名：Energy Procedia
• 出版年：2016
• 出版时间：November 2016
• 年：2016
• 卷：100
• 期：Complete
• 页码：522-525
• 全文大小：386 K
• 卷排序：100

文摘

The hexagonal conical rings (HCR) modified from the typical conical ring (CR) are used as a turbulence promoter for producing the vortex flows to enhance the heat transfer rate in a heat exchanger tube. To reduce the pressure loss, the V-shaped HCR (V-HCR) obtained by cutting both symmetric plane of the cone-tip of HCR at 30°, 45° and 60° is offered in the present work. The tube fitted with V-HCR elements having a fixed inlet and outlet diameter is numerically investigated. The computation is carried out for Reynolds number in a range of 3000 to 20,000 in a uniform heat-fluxed test tube. The numerical results show that the V-HCR insert leads to much higher heat transfer than the typical CR/HCR insert or the smooth tube alone and also provides lower friction factor. The 30° V-shaped HCR gives the highest heat transfer and thermal performance due to the lowest friction loss, indicating the promising device of the V-HCR.