Pervaporation separation of methanol/methyl tert-butyl ether mixtures using polyarylethersulfone with cardo membranes

详细信息    查看全文

• 作者：Guang Lu Han ; Qiu Gen Zhang ; Ai Mei Zhu ; Qing Lin Liu ; ^{qlliu@xmu.edu.cn}
• 关键词：Pervaporation ; Polyarylethersulfone with cardo ; Methanol ; Methyl tert-butyl ether
• 刊名：Separation and Purification Technology
• 出版年：2013
• 出版时间：2 April, 2013
• 年：2013
• 卷：107
• 期：Complete
• 页码：211-218
• 全文大小：801 K

文摘

Membranes based on polyarylethersulfone with cardo (PES-C) were prepared for pervaporation (PV) separation of methanol (MeOH)/methyl tert-butyl ether (MTBE) mixtures. The membranes were characterized using wide angle X-ray diffraction (WAXRD), scanning electron microscopy (SEM) and contact angle metering. The swelling and mechanical properties of the membranes in MeOH/MTBE mixtures were studied. The degree of swelling (DS) was less than 7 % originating from the good solvent proof and excellent mechanical properties of PES-C. N-methyl pyrrolidone (NMP) is found to be the optimum solvent for PES-C membrane preparation against N,N-dimethylformamide (DMF). The effect of annealing temperature and annealing time on the structure and PV performance of the PES-C membranes was thoroughly discussed. The results showed that increasing annealing temperature or annealing time would enhance MeOH permselectivity and reduce permeation flux. By varying feed MeOH content from 5 to 40 wt. % , permeation flux increased from 1.21 to 4.52 kg ¦Ìm m^?2 h^?1, and MeOH content in the permeate was almost constant. The permeation flux increased and MeOH permselectivity decreased with increasing feed temperature.