Effect of modification by Pt and manufacturing processes on the microstructure of two NiCoCrAlYTa bond coatings intended for thermal barrier system applications

详细信息    查看全文

• 作者：Auré ; lie V ; e Put ; Marie-Christine Lafont ; Djar Oquab ; Aymeric Raffaitin ; Daniel Monceau
• 关键词：TBC ; Pt effect ; MCrAlY ; Bond coatings ; Microstructure
• 刊名：Surface and Coatings Technology
• 出版年：2010
• 出版时间：25 October 2010
• 年：2010
• 卷：205
• 期：3
• 页码：717-727
• 全文大小：2305 K

文摘

Few studies have already shown that Pt influences the diffusion of aluminium and therefore the microstructure of β-NiAl or γ-Ni/γ′-Ni₃Al materials. Besides, several works have revealed that the addition of Pt to MCrAlY (M = Ni and/or Co) improves the oxidation/corrosion behavior of the material. Nevertheless, very few data have been published on the microstructure of such modified MCrAlYs. Then, the present work deals with the addition of Pt to two NiCoCrAlYTa coatings that differ by their manufacturing process. Characterization is carried out in order to understand the influence of Pt diffusion but also the effect of the manufacturing process on the final microstructure. The collected data from XRD, SEM, EDS and TEM analyses reveal that an Al uphill diffusion occurs during heat treatment due to the presence of the Pt layer. The Al diffusion from the NiCoCrAlYTa bulk to the Pt-rich surface is so extensive that no more β-phase remains within the core of the coating. Pt may also dissolve TaC, precipitates largely present in the non-modified NiCoCrAlYTa coatings. In addition to Pt, the microstructure of the NiCoCrAlYTa prior to Pt deposition and heat treatment, dependent on the NiCoCrAlYTa manufacturing process, greatly influences the final microstructure.