Modelling of the effect of dislocation channel on intergranular microcrack nucleation in pre-irradiated austenitic stainless steels during low strain rate tensile loading

详细信息    查看全文

• 作者：Pierre Evrard ; Maxime Sauzay
• 刊名：Journal of Nuclear Materials
• 出版年：2010
• 出版时间：15 October 2010
• 年：2010
• 卷：405
• 期：2
• 页码：83-94
• 全文大小：1189 K

文摘

In the present article, the effect of dislocation channel on intergranular microcrack nucleation during the tensile deformation of pre-irradiated austenitic stainless steels is studied. Because several slip planes are activated within the dislocation channel, the simple dislocation pile-up model seems not well suited to predict grain boundary stress field. Finite element computations, using crystal plasticity laws and meshes including a channel of finite thickness, are also performed in order to study the effect of some microstructural characteristics on grain boundary stress field. Numerical results show that: the thickness and the length of the dislocation channel influence strongly the grain boundary normal stress field. The grain boundary orientation with respect the stress axis does not affect so much the grain boundary normal stresses close to the dislocation channel. On the contrary far away the dislocation channel, the grain boundary stress field depends on the grain boundary orientation. Based on these numerical results, an analytical model is proposed to predict grain boundary stress fields. It is valuable for large ranges of dislocation channel thickness, length as well as applied stress. Then, a macroscopic microcrack nucleation criterion is deduced based on the elastic–brittle Griffith model. The proposed criterion predicts correctly the influence of grain boundary characteristics (low-angle boundaries (LABs), non-coincident site lattice (non-CSL) high-angle boundaries (HABs), special grain boundaries (GBs)) on intergranular microcrack nucleation and the macroscopic tensile stress required for grain boundary microcrack nucleation for pre-irradiated austenitic stainless steels deformed in argon environment. The criterion based on a dislocation pile-up model (Smith and Barnby) underestimates strongly the nucleation stress. These results confirm that pile-up models are not well suited to predict microcrack nucleation stress in the case of dislocation channels impacting grain boundary. The proposed criterion is applied to the prediction of the IASCC macroscopic nucleation stress for pre-irradiated material tested in PWR environment and the predictions are discussed with respect to experimental data. Finally, the limitations of the continuum modelling are discussed.