Characterization of bulk stainless steel joints developed through microwave hybrid heating

详细信息    查看全文

• 作者：Amit Bansal^a ; ^{amit.bansal978@gmail.com" class="auth_mail} ; Apurbba Kumar Sharma^a ; ¹ ; ^{akshafme@iitr.ernet.in" class="auth_mail} ; Pradeep Kumar^a ; ² ; ^{kumarfme@iitr.ernet.in" class="auth_mail} ; Shantanu Das^b ; ³ ; ^{shantanu@barc.gov.in" class="auth_mail}
• 关键词：Characterization ; Microwave joining ; Stainless steel-316 ; Microstructure ; Fracture
• 刊名：Materials Characterization
• 出版年：May, 2014
• 年：2014
• 卷：91
• 期：Complete
• 页码：34-41
• 全文大小：1379 K

文摘

Processing of metallic materials through microwave heating is a challenging area of research. In the present work, joining of stainless steel-316 to stainless steel-316 in the bulk form has been carried out by placing stainless steel-316 powder at the interface and through targeted heating using microwave hybrid heating. The trials were carried out in a multimode microwave applicator at a frequency of 2.45 GHz and power 900 W. The developed joints were characterized using X-ray diffraction, field emission scanning electron microscopy equipped with energy dispersive X-ray spectroscope and measurement of Vicker's microhardness, porosity and tensile strength. The X-ray diffraction spectrum of the developed joint shows the presence of chromium carbide, iron carbide and iron silicide phases that eventually contribute to enhancement of the microhardness of the joint. The scanning electron microscope micrographs confirm classical metallurgical bonding between the substrate and the interface (molten powder) layer; the epitaxial growth rate was observed adjacent to the fusion zone. The average observed Vicker's microhardness in the joint zone on the grain boundary was significantly higher than that inside the grains due to the presence of various hard phases at the grain boundaries. Evaluation of the tensile strength of the joints showed an average ultimate tensile strength of 425.0 MPa with an average elongation of 9.44%.