Plait point in ternary system with a miscibility gap: Analysis of the procedures involved in its determination and development of novel procedures

详细信息    查看全文

• 作者：Gaetano Mangiapia^a ; ^{g.mangiapia@fz-juelich.de" class="auth_mail" title="E-mail the corresponding author} ; Roberto Sartorio^b ; Radu P. Lungu^c
• 关键词：Ternary systems ; Type 1 systems ; Tie lines ; Plait point determination ; Tie line slope ; Tie line length
• 刊名：Fluid Phase Equilibria
• 出版年：2016
• 出版时间：15 February 2016
• 年：2016
• 卷：409
• 期：Complete
• 页码：49-58
• 全文大小：753 K

文摘

Ternary miscibility data, usually reported in the Roozeboom triangular diagram, have been analyzed in Cartesian coordinates defined by X = (x_i − x_j)/3 and Y = x_k where x_i, x_j, and x_k are the mole fractions of the two solvents and of the solute, respectively. This has allowed for an easy analytical representation of all the elements which are characteristic of the system: binodal curve, tie lines, plait point. Three novel methods for determining the plait point composition have been proposed based only on its fundamental properties. The results have been presented by applying the methods to some systems described in the literature. Differences between the values obtained with the proposed methods and those obtainable with the NRTL and UNIQUAC models have been found and are discussed.