Preparation of TiO₂ composite microfiltration membranes by the wet powder spraying method

详细信息    查看全文

• 作者：Li Zhao ; Martin Bram ; Hans Peter Buchkremer ; Deltev Stö ; ver ; Zi Li
• 关键词：TiO₂ membranes ; Metallic elements ; Metallic filters ; Microfiltration (MF) ; Wet powder spraying (WPS)
• 刊名：Journal of Membrane Science
• 出版年：2004
• 出版时间：15 November 2004
• 年：2004
• 卷：244
• 期：1-2
• 页码：107-115
• 全文大小：563 K

文摘

A composite TiO₂ membrane supported by a planar or tubular porous metallic substrate has been developed using the wet powder spraying (WPS) method. Intermediate layers made of the same material as that of the support were found to be necessary to prevent the penetration of the powder suspension into the pores of the support during the spraying process. The morphology of the membrane was examined by LM, SEM and XRD analysis, and the characterization was performed by bubble-point, flow rate and stability tests. By using the ultrasonic wave and grinding methods it was possible to distinctly decrease the imperfections in the membranes. The TiO₂ membrane itself has an average pore size of 0.11–0.12 μm, a thickness of 20–30 μm and an air flux up to 1.9 × 10⁵ L/h m² bar.