Prospects of warm dense matter research at HiRadMat facility at CERN using 440?MeV SPS proton beam

详细信息    查看全文

• 作者：N.A. Tahir^a ; ^{n.tahir@gsi.de} ; J. Blanco Sancho^b ; R. Schmidt^c ; A. Shutov^d ; A.R. Piriz^e
• 关键词：Warm dense matter ; Strongly coupled plasmas ; High intensity proton beams
• 刊名：High Energy Density Physics
• 出版年：2013
• 出版时间：June, 2013
• 年：2013
• 卷：9
• 期：2
• 页码：269-276
• 全文大小：2050 K

文摘

In this paper we present numerical simulations of heating of a solid copper cylinder by the 440?GeV proton beam delivered by the Super Proton Synchrotron (SPS) at CERN. The beam is made of 288 proton bunches while each bunch comprises of 1.15¡¤10¹¹ so that the total number of protons in the beam is about 1.3¡¤10¹³. The bunch length is 0.5?ns while two neighboring bunches are separated by 25?ns so that the beam duration is 7.2?¦Ìs. Particle intensity distribution in the transverse direction is a Gaussian and the beam can be focused to a spot size with ¦Ò?=?0.1?mm-1.0?mm. In this paper we present results using two values of ¦Ò, namely 0.2?mm and 0.5?mm, respectively. The target length is 1.5?m with a radius?=?5?cm and is facially irradiated by the beam. The energy deposition code FLUKA and the two-dimensional hydrodynamic code BIG2 are employed using a suitable iteration time to simulate the hydrodynamic and the thermodynamic response of the target. The primary purpose of this work was to design fixed target experiments for the machine protection studies at the HiRadMat (High Radiation Materials) facility?at CERN. However this work has shown that large samples of High Energy Density (HED) matter will be generated in such experiments which suggests an additional application of this facility. In the present paper we emphasize the possibility of doing HED physics experiments at the HiRadMat in the future.