Preparation and characterization of self-cleaning alumina hollow fiber membrane using the phase inversion and sintering technique

详细信息    查看全文

• 作者：Norfazliana Abdullah^a ; Mukhlis A. Rahman^a ; ^{r-mukhlis@utm.my" class="auth_mail" title="E-mail the corresponding author} ; Mohd Hafiz Dzarfan Othman^a ; A.F. Ismail^a ; Juhana Jaafar^a ; Azian Abd Aziz^b
• 关键词：Alumina hollow fiber membrane ; Phase inversion ; Ceramic suspension ; Sintering process ; Ultra-violet irradiation ; Self-cleaning
• 刊名：Ceramics International
• 出版年：2016
• 出版时间：1 August 2016
• 年：2016
• 卷：42
• 期：10
• 页码：12312-12322
• 全文大小：3030 K

文摘

Asymmetric alumina hollow fiber membranes were prepared using the phase inversion technique followed by the sintering process at high temperatures. The ceramic suspensions were formulated by mixing alumina powder with polyethersulfone (PESf), polyethylene glycol-30-dipolyhydroxystearate and N-methyl-2-pyrrolidone (NMP) as the polymer binder, dispersant and solvent, respectively. The objectives of this study were (i) to investigate the effects of spinning parameters, namely, ceramic loading, ceramic to polymer binder ratio, different internal coagulant temperatures and air gap variation on asymmetric structure formation and (ii) to study the self-cleaning properties of alumina hollow fiber membranes. The ceramic hollow fiber membrane was characterized in terms of its viscosity, structural morphology and mechanical strength using a scanning electron microscope (SEM). The results showed that the finger-like structures in alumina hollow fiber membranes could be formed but their patterns were influenced by the ceramic suspension and spinning parameters. Variations in their morphology resulted in significant effects on the mechanical properties and permeability of ceramic hollow fiber membranes. A CuO/CeO₂ catalyst was deposited onto the alumina membrane support with the catalyst distribution determined by SEM/EDX. Self-cleaning properties were examined by comparing normal cleaning and self-cleaning properties with irradiation of UV for protein rejection. The result of self-cleaning by UV showed higher bovine serum albumin (BSA) permeation due to super-hydrophilicity of the CuO/CeO₂ catalyst.