Microstructure and mechanical properties of TC4 alloy modified and reinforced by TiB+TiN/Ti inoculants ribbons

详细信息    查看全文

• 作者：Long Zhao ; Chunxiang Cui ; ^{hutcui@hebut.edu.cn" class="auth_mail" title="E-mail the corresponding author} ; Shuangjin Liu ; Lichen Zhao ; Nuo Li
• 关键词：Rapid solidification ; Electron microscopy ; Titanium alloy ; Grain refinement ; Mechanical characterization
• 刊名：Materials Science & Engineering A
• 出版年：2016
• 出版时间：29 April 2016
• 年：2016
• 卷：663
• 期：Complete
• 页码：8-16
• 全文大小：6926 K

文摘

Vacuum rapid solidification technique was utilized to prepare TiB+TiN/Ti inoculants ribbons, which were added to TC4 alloy melt to get refined titanium matrix composites (TMCs). For comparing and analyzing the influence of inoculants, authors mainly studied microstructure and mechanical properties of TC4 alloy modified and reinforced by TiB+TiN/Ti inoculants ribbons prepared by in situ reaction. The in situ reaction are: (1) 3Ti+2BN→TiB₂+2TiN, (2) Ti+TiB₂→2TiB. Microstructure and morphology observation showed that the grain size of TMCs was refined as the volume fraction of reinforcements increased. It is worth noticing that the reinforcements in the TMCs prepared by inoculating method tend to distributed in matrix homogeneously. The tensile test results showed that the tensile strength of TMCs increased significantly by inoculating. Inoculating method showed advantages to preparing by in situ reaction directly. The hardness and wear-resisting property of TMCs were also investigated and found to be promoted as reinforcements content increased.