Performances improvements and torque ripple minimization for VSI fed induction machine with direct control torque

详细信息    查看全文

• 作者：R. Abdelli^a ; D. Rekioua ; ^a ; ^{dja_rekioua@yahoo.fr} ; T. Rekioua^a
• 关键词：Direct torque control ; Induction machines ; Space vector modulation ; Torque ripple minimisation ; Inverter switching frequency
• 刊名：ISA Transactions
• 出版年：2011
• 出版时间：April 2011
• 年：2011
• 卷：50
• 期：2
• 页码：213-219
• 全文大小：1052 K

文摘

This paper describes a torque ripple reduction technique with constant switching frequency for direct torque control (DTC) of an induction motor (IM). This method enables a minimum torque ripple control. In order to obtain a constant switching frequency and hence a torque ripple reduction, we propose a control technique for IM. It consists of controlling directly the electromagnetic torque by using a modulated hysteresis controller. The design methodology is based on space vector modulation (SVM) of electrical machines with digital vector control. MATLAB simulations supported with experimental study are used. The simulation and experimental results of this proposed algorithm show an adequate dynamic to IM; however, the research can be extended to include synchronous motors as well. The implementation of the proposed algorithm is described. It doesn’t require any PI controller in the torque control loop. The hardware inverter is controlled digitally using a Texas Instruments TMS320F240 digital signal processor (DSP) with composed C codes for generating the required references. The results obtained from simulation and experiments confirmed the feasibility of the proposed strategy compared to the conventional one.