MPO-type single-mode multi-fiber connector: Low-loss and high-return-loss intermateability of APC-MPO connectors

详细信息    查看全文

• 作者：Toshiaki Satake^a ; ^{toshiakisatake@usconec.com} ; Shinji Nagasawa^b ; Mike Hughes^a ; Sharon Lutz^a [Author vitae]
• 关键词：Optical fiber connector ; Optical fiber communication ; Monte Carlo methods ; Optical fiber cables ; Optical interconnections
• 刊名：Optical Fiber Technology
• 出版年：2011
• 出版时间：January 2011
• 年：2011
• 卷：17
• 期：1
• 页码：17-30
• 全文大小：1938 K

文摘

The electrical communication laboratory of NTT started the research of MT (Mechanically Transferable) connector in early 1980s. The initial goal was to realize a multi-fiber connector which can repeat low loss, stable, reliable and low-cost connections of subscriber optical fiber cable networks for more than 20 years period in the field. We review the multi-fiber alignment design with two guide pins, and following several technical improvements toward the final MT connector used in the commercial telecommunication networks. And then, we review development histories to reach to the low-loss, high-return-loss and reliable APC-MPO (Angled Physical Contact Multi-fiber Push On) connectors introduced in NTT COs and in Verizon’s FTTH (Fiber To The Home) networks. In the latter half, we propose the low-loss intermateability design for connectors made by different suppliers in order to enable mass introductions into large scale systems. In addition we also describe an accurate connector loss presumption method for different lots’ ferrules based on the MT ferrule dimension data before assembling the connectors. We believe with a wide intermateability of APC-MPO connector will increase its use in the fields. The APC-MPO connector manufactured based on the proposed design had low insertion losses of less than 0.25 dB at the same level of simplex connectors and the higher level of return losses higher than 65 dB.