Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure

详细信息    查看全文

• 作者：Rino Morent ; Nathalie De Geyter ; Martine Trentesaux ; Lé ; on Gengembre ; Peter Dubruel ; Christophe Leys ; Edmond Payen
• 关键词：Plasma polymerization ; Acrylic acid ; XPS ; FTIR ; Water stability
• 刊名：Applied Surface Science
• 出版年：2010
• 出版时间：1 November 2010
• 年：2010
• 卷：257
• 期：2
• 页码：372-380
• 全文大小：376 K

文摘

Plasma polymerization of acrylic acid has become an interesting research subject, since these coatings are expected to be beneficial for biomedical applications due to their high surface density of carboxylic acid functional groups. However, the application of these monomers is counteracted by their low stability in humid environments, since a high stability is a required characteristic for almost any biological application. The present work investigates whether it is possible to obtain stable deposits with a high retention of carboxylic acid functions by performing plasma polymerization on polypropylene substrates with a dielectric barrier discharge operating at medium pressure. In order to obtain coatings with the desired properties, the plasma parameters need to be optimized. Therefore, in this paper, the influence of discharge power and location of the substrate in the discharge chamber is examined in detail. The properties of the deposited films are studied using contact angle measurements, X-ray photoelectron spectroscopy, atomic force microscopy and Fourier transform infrared spectroscopy. Moreover, to determine whether the obtained deposits are soluble in water, the coatings are once again analyzed after rinsing in water. This paper will clearly show that stable COOH-rich surfaces can be obtained at high discharge power and close to the monomer inlet, which might open perspectives for future biomedical applications.