Characterization of aging-induced microstructural changes in M250 maraging steel using magnetic parameters
详细信息 查看全文
- 作者：K.V. Rajkumar ; S. Vaidyanathan ; Anish Kumar ; T. Jayakumar ; Baldev Raj ; K.K. Ray
- 关键词：Maraging steel ; Magnetic Barkhausen emission ; Microstructure ; Aging ; Austenite reversion
- 刊名：Journal of Magnetism and Magnetic Materials
- 出版年：2007
- 出版时间：May 2007
- 年：2007
- 卷：312
- 期：2
- 页码：359-365
- 全文大小：910 K
文摘
The best combinations of mechanical properties (yield stress and fracture toughness) of M250 maraging steel is obtained through short-term thermal aging (3–10 h) at 755 K. This is attributed to the microstructure containing precipitation of intermetallic phases in austenite-free low-carbon martensite matrix. Over-aged microstructure, containing reverted austenite degrades the mechanical properties drastically. Hence, it necessitates identification of a suitable non-destructive evaluation (NDE) technique for detecting any reverted austenite unambiguously during aging. The influence of aging on microstructure, room temperature hardness and non-destructive magnetic parameters such as coercivity (Hc), saturation magnetization (Ms) and magnetic Barkhausen emission (MBE) RMS peak voltage is studied in order to derive correlations between these parameters in aged M250 maraging steel. Hardness was found to increase with precipitation of intermetallics during initial aging and decrease at longer durations due to austenite reversion. Among the different magnetic parameters studied, MBE RMS peak voltage was found to be very sensitive to austenite reversion (non-magnetic phase) as they decreased drastically up on initiation of austenite reversion. Hence, this parameter can be effectively utilized to detect and quantify the reverted austenite in maraging steel specimen. The present study clearly indicates that the combination of MBE RMS peak voltage and hardness can be used for unambiguous characterization of microstructural features of technological and practical importance (3–10 h of aging duration at 755 K) in M250 grade maraging steel.