Creep rupture behavior of semi-solid cast 7075-T6 Al alloy

详细信息    查看全文

• 作者：N. Mahathaninwong ; Y. Zhou ; S.E. Babcock ; T. Plookphol ; J. Wannasin ; S. Wisutmethangoon
• 关键词：7075 Al alloy ; Creep rupture ; Semi-solid cast ; Gas induced semi-solid
• 刊名：Materials Science and Engineering: A
• 出版年：2012
• 出版时间：30 October, 2012
• 年：2012
• 卷：556
• 期：Complete
• 页码：107-113
• 全文大小：1782 K

文摘

The creep rupture behavior of semi-solid cast 7075-T6 Al alloy produced by the Gas Induced Semi-Solid (GISS) process was investigated and compared to that of commercial 7075-T651 Al alloy. The semi-solid cast 7075-T6 Al alloy displayed lower minimum creep rate and longer creep rupture time than the commercial 7075-T651 Al alloy. On the basis of their stress exponent, n, values of 6.3, dislocation creep was seemingly the predominant mechanism controlling the creep deformation of both alloys. The creep rupture time of the semi-solid cast 7075-T6 Al alloy was distinctly longer than that of the commercial 7075-T651 Al alloy at stress regimes of 120-140 MPa. This difference was attributed to the lower precipitate coarsening and higher precipitate density in the semi-solid cast alloy. Creep cavities predominately controlled the creep rupture of the semi-solid cast 7075-T6 Al alloy despite the appearance of precipitate coarsening. The commercial 7075-T651 Al alloy creep rupture behavior was controlled by the combination of rapid precipitate coarsening and creep cavities. However, de-cohesion between insoluble particles and the matrix is evidently accelerated with increasing stress to 180 MPa, leading to cavity propagation and resulting in the convergence of creep rupture time in the semi-solid cast 7075-T6 Al alloy to that of the commercial 7075-T651 Al alloy.