Failure mechanisms of magnesia alumina spinel abradable coatings under thermal cyclic loading
详细信息 查看全文
- 作者：Svenja Ebert ; Robert M¨¹cke ; Daniel Mack ; Robert Va?en ; Detlev St?ver ; Tanja Wobst ; Susanne Gebhard
- 关键词：Burner rig test ; Abradable coating ; Mg&ndash ; Al&ndash ; spinel ; Failure mechanism ; High pressure turbine
- 刊名：Journal of the European Ceramic Society
- 出版年：2013
- 出版时间：December, 2013
- 年：2013
- 卷：33
- 期：15-16
- 页码：3335-3343
- 全文大小：2484 K
文摘
Abradable coatings have been used in low- and high-pressure sections of jet engine compressors for more than 40 years. Today, they are also used in the high-pressure turbine of jet engines and are gaining more interest for applications in industrial gas turbines. They minimise the clearance between the rotating blade tips and the stationary liners. Aside from being abradable, the coatings have to be mechanically stable and withstand high thermo-mechanical loadings. A typical material used in engines today is yttria-stabilised zirconia (YSZ). This material advantageously combines a suitable thermal conductivity with a high thermal expansion coefficient, but shows a temperature capability limited to 1200 ¡ãC in long-term applications. Typical abradable coating thicknesses are above 1 mm. With increasing coating thickness and limited cooling efficiency leading to high surface temperatures, there is a risk of premature failure. As a result, new ceramic materials have been developed with better high-temperature capability. The present work investigates an atmospheric plasma sprayed ceramic double-layer coating system composed of 7YSZ as an intermediate layer and magnesia alumina spinel as a top layer.
This double-layer system was sprayed onto disc-shaped Inconel 738 superalloy substrates, which were coated with a vacuum plasma sprayed MCrAlY bondcoat. The lifetime of the coating system was assessed via thermal gradient cycling testing with surface temperatures above 1400 ¡ãC. During cycling, the samples showed a typical failure mechanism with exfoliation of thin coating lamellae starting from the coating surface. This failure mechanism was not observed in thermal barrier or abradable coatings in the past. The failure mechanism was analysed and mismatch stress calculations were carried out.