Investigation of salt addition and acid treatment effects on the transport properties of ionically cross-linked polyelectrolyte complex membranes based on chitosan and polyacrylic acid

详细信息    查看全文

• 作者：Tolga Gü ; mü ; &#x15f ; oğ ; lu^a ; ^{tolgagumusoglu86@hotmail.com"" rel=""nofollow} ; Gü ; l&#x15f ; en Albayrak Arı ; ^a ; ^{gulsen@istanbul.edu.tr"" rel=""nofollow} ; Hü ; seyin Deligö ; z ; ^a ; ^{hdeligoz@istanbul.edu.tr"" rel=""nofollow} ; ^{hdeligoz1972@yahoo.com"" rel=""nofollow}
• 关键词：Chitosan ; Membrane ; Methanol permeability ; Polyelectrolyte complex ; Proton conductivity
• 刊名：Journal of Membrane Science
• 出版年：2011
• 出版时间：1 July 2011
• 年：2011
• 卷：376
• 期：1-2
• 页码：25-34
• 全文大小：740 K

文摘

Some approaches are applied for lowering methanol diffusion which leads a reduced cell performance for direct methanol fuel cells (DMFCs). In this contribution, investigation of the salt addition and acid treatment effects on the transport properties of chitosan (CHI) and poly(acrylic acid) (PAA) based polyelectrolyte complexes (PEC) are reported. Acid treated PEC membranes (PEC5-H⁺) with externally added salt are found to be suitable for DMFCs due to low methanol permeability (4.6 × 10⁻⁸ cm² s⁻¹), acceptable conductivity (12.9 mS cm⁻¹) and membrane selectivity (28.1 × 10⁴ S s cm⁻³). The ionic interaction of the PEC and H₂SO₄ not only provides an enhancement in methanol barrier properties but also results in a positive effect in mechanical integrity until 230 °C. The oxidative and hydrolytic stability of PEC membranes can be acceptable for DMFCs in which diluted methanol was used. Above all, the cost effectiveness and controllable synthesis technique of acid treated PECs make their applicability in DMFC quite attractive.