Electrochemical behaviour of Ti–6Al–4V alloy and Ti in azide and halide solutions

详细信息    查看全文

• 作者：F. El-Taib Heakal ; ^a ; ^{fakihaheakal@yahoo.com"" rel=""nofollow} ; A.A. Ghoneim^a ; A.S. Mogoda^a ; Kh. Awad^a
• 关键词：A. Titanium ; A. Ti&#x2013 ; 6Al&#x2013 ; 4V ; A. NaN₃ ; A. Halides ; B. EIS ; C. Passivation
• 刊名：Corrosion Science
• 出版年：2011
• 出版时间：September 2011
• 年：2011
• 卷：53
• 期：9
• 页码：2728-2737
• 全文大小：575 K

文摘

Electrochemical techniques including open circuit potential measurement, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were used to evaluate the corrosion and passivation behaviour of Ti–6Al–4V alloy in sodium azide (NaN₃) solutions compared to the behaviour of its pure base metal Ti. The results showed that increasing azide concentration increases the rate of corrosion (i_corr) and shifts negatively the rest potential (E_f), as well as decreases the spontaneous thickening rates of the inner and outer layers constituting the passive oxide film on each sample. These effects are more accentuated for the alloy than for the metal. Moreover, the electrical resistance (R_ox) and the relative thickness (1/C_ox) of the oxide films on the two samples exhibit an almost linear decrease vs. NaN₃ concentration. The results suggested that addition of Al and V to Ti, although improves its machinability, yet it decreases the performance of its surface oxide film to protect the degradation of the metal. The alloy was found to be more susceptible to corrosion than its base metal, since Ti expresses higher apparent activation energy (E_a) for the corrosion process than Ti–6Al–4V. Electrochemical behaviour of Ti in azide medium was also compared with that in various halide solutions. It was found that Ti has a stronger propensity to form spontaneous passivating oxide layers in bromide more than in azide and other halide media, where the positive shift in the value of E_f and the simultaneous increase in the oxide film resistance (R_ox) follow the sequence: Br⁻ >  > Cl⁻ > I⁻ > F⁻.