Numerical simulation of the stress-strain curve and the stress and strain distributions of the titanium-duplex alloy

详细信息    查看全文

• 作者：Xiqing ZHAO ; Xinliang ZANG ; Qingfeng WANG ; Joongkeun Park ; Qingxiang YANG
• 关键词：titanium alloy ; stress-strain curve ; numerical simulation ; finite element method
• 刊名：Rare Metals
• 出版年：2008
• 出版时间：October 2008
• 年：2008
• 卷：27
• 期：5
• 页码：463-467
• 全文大小：1194 K

文摘

The stress-strain curve of an α-β Ti-8Mn alloy was measured and then it was calculated with finite element method (FEM) based on the stress-strain curves of the single α and β phase alloys. By comparing the calculated stress-strain curve with the measured one, it can be seen that they fit each other very well. Thus, the FE model built in this work is effective. According to the above mentioned model, the distributions of stress and strain in the α and β phases were simulated. The results show that the stress gradients exist in both α and β phases, and the distributions of stress are inhomogeneous. The stress inside the phase is generally higher than that near the interface. Meanwhile, the stress in the α phase is lower than that in the β phase, whereas the strain in the α phase is higher than that in the β phase.