Estimation of double-Wiebe function parameters using least square method for burn durations of ethanol-gasoline blends in spark ignition engine over variable compression ratios and EGR levels

详细信息    查看全文

• 作者：Yeliana  ; Yeliana^a ;   ; ^{yyeliana@mtu.edu} ; C.  ; Cooney^a ;   ; ^{cpcooney@mtu.edu} ; J.  ; Worm^a ;   ; ^{jjworm@mtu.edu} ; D.J.  ; Michalek^b ;   ; ¹ ;   ; ^{donna@mtu.edu} ; J.D.  ; Naber^a ;   ; ^{jnaber@mtu.edu}
• 关键词：Spark ignition engine ; Combustion modeling ; Burn durations ; Ethanol ; Wiebe function
• 刊名：Applied Thermal Engineering
• 出版年：2011
• 出版时间：October 2011
• 年：2011
• 卷：31
• 期：14-15
• 页码：2213-2220
• 全文大小：957 K

文摘

Phasing and duration are two of the most important aspects of combustion in Spark Ignition (SI) engines. They impact efficiency, emissions, and overall engine performance. These aspects of combustion can be represented by the mass fraction burn (MFB) profile. Having an accurate mathematical model of the MFB profile leads to an ability to model the combustion process and, thus, properly model the overall engine in 1D engine simulation tools.

The Wiebe function is widely used in engine simulation to estimate the MFB profile as a function of crankshaft position. In this work, for the purpose of validating a sub-process, the Wiebe function parameters were calculated using an analytical solution and a least squares method by fitting MFB locations, as determined from analysis of measured cylinder pressure, to both single and double-Wiebe functions. To determine the accuracy of the respective Wiebe function, a single-zone pressure model was applied to reconstruct the pressure trace. Once the pressure trace is recovered, the reconstructed pressure trace is then compared with the experimentally measured cylinder pressure trace. Results showed that the double-Wiebe function model fit better than the single-Wiebe function model. The root mean square error (RMSE) of the reconstructed pressure trace using the double-Wiebe estimation is 7.9?kPa. In comparison, the RMSEs of the reconstructed pressure traces using the single-Wiebe analytical solution and single-Wiebe least squares methods were 70.0?kPa and 75.9?kPa, respectively, demonstrating a significant improvement.