Failure of polymerized lactic acid tacks in shoulder surgery

详细信息    查看全文

• 作者：John P. Wilkerson ; John E. Zvijac ; John W. Uribe ; Matthias R. Schü ; rhoff ; Jeremy B. Green
• 关键词：Minimal detectable change ; reliability ; belly-press test ; hand-held dynamometer ; subscapularis
• 刊名：Journal of Shoulder and Elbow Surgery
• 出版年：2003
• 出版时间：March 2003
• 年：2003
• 卷：12
• 期：2
• 页码：117-121
• 全文大小：112 K

文摘

The purpose of this study was to evaluate 4 cases in which bioabsorbable polymerized lactic acid tacks failed after arthroscopic shoulder surgery. Four male elite athletes with recurrent shoulder pain were seen a mean of 7.5 months (range, 3-10 months) after initial arthroscopy. Three of the cases involved superior labrum anterior-to-posterior (SLAP) lesion stabilization, and the fourth case was a rotator cuff (RTC) repair. In the three labral repairs, the implant had broken and the unabsorbed fragments were visible with magnetic resonance imaging. The device used in the RTC repair showed no signs of absorption. All 4 patients underwent arthroscopic removal of the polymer tack fragments to alleviate their symptoms, 2 of whom had foreign-body reactions that required synovectomy. On the basis of clinical examination and magnetic resonance imaging, 2 of the SLAP lesions and the RTC tear had healed. The third patient with a SLAP lesion required arthroscopic debridement of a portion of the labrum. The intact RTC implant had backed out of its insertion point. In all 3 labral repairs, the polymerized lactic acid implant experienced a mechanical failure near the head-shaft junction. We theorize that the labral implants failed because of the variable rate of degradation along the shaft of the devices from the intraarticular to intraosseous regions. (J Shoulder Elbow Surg 2003;12:117-21)