Nanoaluminum/Nitrocellulose microparticle additive for burn enhancement of liquid fuels

详细信息    查看全文

• 作者：Philip M. Guerieri ; Jeffery B. DeLisio ; Michael R. Zachariah ; ^mrz@umd.edu
• 关键词：Nanoaluminum ; Nitrocellulose ; Electrospray ; Fuel additives ; Droplet combustion
• 刊名：Combustion and Flame
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：176
• 期：Complete
• 页码：220-228
• 全文大小：2291 K
• 卷排序：176

文摘

Addition of metal and metal oxide nanoparticles to hydrocarbon fuels has shown the ability to increase the volumetric energy density, decrease ignition delay, increase heat of combustion, and catalyze fuel decomposition in recent research. However, energetic metal nanoparticles are prone to aggregation, which occurs at an increased rate near the regressing surface of a burning liquid droplet where local concentrations increase and can form a transport-inhibiting shell, ultimately decreasing the droplet burning rate. Alternatively, gas ejections from the droplet can disrupt shell formation and transport nanoparticles from the droplet to the flame zone. This study quantifies up to a 12.1% decrease in the burning rate constant of Kerosene droplets when 6.1 wt% nanoaluminum (nAl) particles are added (the maximum stable loading) with a hydrocarbon-based surfactant in a free-falling single droplet combustion experiment. Addition of nitrocellulose (NC) particles to the nanofuel diminishes or fully counteracts the burning rate decreases and provides a means of tuning the burning rate constant higher than that of pure Kerosene (maximum 13.8% increase over control with 2.3 wt% nAl and 0.6 wt% NC added). To reach stable nanofuels at higher particle loadings up to 15.0 wt% solid additives, nAl and NC were electrosprayed into composite mesoparticles (MP) before suspending with surfactant in Kerosene. These MP-based nanofuels boast increased dispersibility and additive loadings and thus higher achievable burning rates (maximum 26.5% increase over control) than physically mixed analogs. A mechanism is proposed in which droplet disruptions influenced by NC addition include cyclical inflations, during which the liquid gasification rate increases, e.g. by expanding the outer surface area of the droplet.