Transient heat transfer for forced flow of helium gas along a horizontal plate with different widths
详细信息    查看全文
文摘
This study is aimed to clarify transient heat transfer process between the surface of solid and the neighboring helium gas in Very High Temperature Reactor (VHTR) or Intermediate Heat Exchanger (IHX). In this paper a series of plate heaters with different widths under various pressures inside a circular channel have been tested for forced convective flow. The heat generation rate of the plate heater was increased with a function of Q0exp(t/) (where t is time and is period of heat generation rate or e-fold time). The heaters were platinum plates with a thickness of 0.1 mm and widths of 2 mm, 4 mm and 6 mm. The heat flux, surface temperature, and transient heat transfer coefficients were measured for helium gas passing by horizontal plates under wide experimental conditions such as velocities, pressures, widths of plate and periods of heat generation rate. It was clarified that the heat transfer coefficient approaches the quasi-steady-state value when the period is more than around 1 s and it becomes higher when the period is shorter than around 1 s. It was found that the heat transfer coefficient becomes higher with the increase of gas pressure under the same velocity and period of heat generation rate. It was also found that the widths have a great influence on the heat transfer coefficient: the heat transfer coefficients of narrow heaters are much higher than those of wide ones under the same velocity and the same pressure. Based on the experimental data, empirical correlations were obtained for both quasi-steady state heat transfer and transient state one at various plate-widths.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700