Polymerization efficiency and flexural strength of low-stress restorative composites

详细信息    查看全文

• 作者：Cecilia Goracci^a ; ^{cecilia.goracci@gmail.com" class="auth_mail} ; ^{goracci12@unisi.it" class="auth_mail} ; Milena Cadenaro^b ; Luca Fontanive^b ; Giuseppe Giangrosso^a ; Jelena Juloski^a ; ^c ; Alessandro Vichi^a ; Marco Ferrari^a
• 关键词：Bulk-fill ; Flexural strength ; Low-stress ; Polymerization ; Resin composite
• 刊名：Dental Materials
• 出版年：June 2014
• 年：2014
• 卷：30
• 期：6
• 页码：688-694
• 全文大小：569 K

文摘

To assess depth of cure (DOC), degree of conversion (DC), and flexural strength (FS) of several resin composites with low-stress behavior.

Methods

SonicFill (Kerr), SureFil^® SDR™ (Dentsply), everX Posterior (GC), Kalore (GC), and Filtek Silorane (3M ESPE) were tested. DOC was measured with the Acetone Shake test. DC was assessed with Fourier Transform Infra-Red spectroscopy on top and at the bottom of 4 mm-thick disk-shaped specimens. Bottom to top ratios of DC percentages were calculated. FS was evaluated with the Three-Point Bending test. DOC, DC, and FS data were statistically analyzed.

Results

SureFil^® SDR™ and everX Posterior achieved significantly greater DOC than Kalore and Filtek Silorane. Also, SonicFill had significantly greater DOC than Filtek Silorane. Mean top DCs ranged between 71.46% and 52.44%. Kalore and everX Posterior had significantly lower top DCs than the other materials. Mean DC values at 4 mm ranged largely from 57.95% to 6.82%. Kalore and Filtek Silorane had the lowest values of bottom DC and the difference was statistically significant. EverX Posterior and SonicFill recorded significantly higher FSs than the other materials.

Significance

SureFil^® SDR™ and everX Posterior exhibited DOC over 4 mm, the maximum thickness recommended for bulk placement, while SonicFill recorded DOC values very close to the 4 mm threshold. SonicFill achieved the highest DC at the irradiated surface, as well as at 4 mm depth. SureFil^® SDR™ demonstrated similarly uniform curing through the bulk increment. All the tested composites complied with the requirements of FS established by ISO 4049/2009.