A study of morphological, thermal, rheological and barrier properties of Poly(3-hydroxybutyrate-Co-3-Hydroxyvalerate)/polylactide blends prepared by melt mixing
详细信息 查看全文
- 作者：Idris Zembouai ; Mustapha Kaci ; St¨¦phane Bruzaud ; Aida Benhamida ; Yves-Marie Corre ; Yves Grohens
- 关键词：Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) ; Polylactide ; Blends ; Morphology ; Properties
- 刊名：Polymer Testing
- 出版年：2013
- 出版时间：August, 2013
- 年：2013
- 卷：32
- 期：5
- 页码：842-851
- 全文大小：1820 K
文摘
The paper aims to study blend properties of biodegradable polymers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polylactide (PLA) prepared by melt mixing. Blend compositions based on PHBV/PLA were investigated according to the following weight ratios, i.e. 100/0, 75/25, 50/50, 25/75 and 0/100?wt % . The study showed through scanning electron microscopy (SEM) that blends of PHBV/PLA are not miscible. This is consistent with differential scanning calorimetry (DSC) data which indicate the presence of two distinct glass transition temperatures (Tg) and melting temperatures (Tm), attributed to the neat polymers, over all the range of blend compositions. Water and oxygen barrier properties of PHBV/PLA blends are significantly improved with increasing the PHBV content in the blend. Further, morphological analyzes indicated that increasing the PHBV content in the polymer blends results in increasing the PLA crystallinity due to the finely dispersed PHBV crystals acting as a filler and a nucleating agent for PLA. On the other hand, the addition of PLA to the blend results in a very impressive increase in the complex viscosity of PHBV. Moreover, the rheological data showed that, excluding the specific behavior of the neat polymers at low frequencies, i.e. less than 0.1?Hz, the complex viscosity of PHBV/PLA blends fits the mixing law well.