The design of fast analog channels for the readout of strip detectors in the inner layers of the SuperB SVT

详细信息    查看全文

• 作者：L. Gaioni^c ; ^{luigi.gaioni@pv.infn.it} ; M. Manghisoni^a ; ^c ; L. Ratti^b ; ^c ; V. Re^a ; ^c ; G. Traversi^a ; ^c
• 关键词：CMOS ; Front-end electronics ; Noise ; Silicon strip detectors ; SVT
• 刊名：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
• 出版年：2013
• 出版时间：1 August, 2013
• 年：2013
• 卷：718
• 期：Complete
• 页码：205-207
• 全文大小：543 K

文摘

Six layers of microstrip detectors are foreseen in the present baseline design of the SuperB Silicon Vertex Tracker. Different strip pitches and lengths will be used in the various SVT layers; however, the capability of standing a high background rate and of operating with high hit detection efficiency will be a common feature of the innermost layers. These requirements set the need for a readout chip with analog channels with a short signal shaping time (25-200 ns in layers 0-3) to achieve an adequate time stamp resolution and a small pulse overlap. These channels are also required to provide a 4-bit hit amplitude resolution for measurements. A new chip is being designed in a 130 nm CMOS process to comply with these specifications. This paper discusses the solutions that are adopted in this chip for the various blocks of the analog channels, and will present the simulation results for the current design along with the expected performance in terms of parameters such as signal-to-noise ratio, dynamic range, linearity, power dissipation.