Synthesis of zinc oxide/titanium dioxide (ZnO/TiO₂) nanocomposites by wet incipient wetness impregnation method and preparation of ZnO/TiO₂ paste using poly(vinylpyrrolidone) for efficient dye-sensitized solar cells

详细信息    查看全文

• 作者：Waqar Ahmad^a ; Umer Mehmood^b ; ^{umermehmood@kfupm.edu.sa} ; ^{organicchemistry2@gmail.com} ; Amir Al-Ahmed^b ; Fahad A. Al-Sulaiman^b ; M. Zaheer Aslam^a ; Muhammad Shahzad Kamal^c ; R.A. Shawabkeh^a
• 关键词：Nanocomposites ; Poly(vinylpyrrolidone) ; Photoanodes ; Light harvesting ; Electron collection ; Electron transport
• 刊名：Electrochimica Acta
• 出版年：2016
• 出版时间：20 December 2016
• 年：2016
• 卷：222
• 期：Complete
• 页码：473-480
• 全文大小：3189 K
• 卷排序：222

文摘

The overall objective of this study is to enhance the power conversion efficiency of dye-sensitized solar cells (DSSCs) by employing nanocomposite photoanodes. Nanocomposites of TiO2 with ZnO were synthesized by impregnation method. ZnO nanoparticles were impregnated on TiO2 in different concentrations and then characterized by Brunauer–Emmett–Teller (BET), X-ray powder diffraction (XRD) and scanning electron microscopy- energy-dispersive X-ray (SEM-EDX) analyses. Thin film photoanodes were prepared using composite paste with poly(vinylpyrrolidone) as a binder. Solar cells fabricated with ZnO/TiO2 nanocomposites photoanodes were characterized by photocurrent–voltage characteristic, Incident photon-to-current efficiency, and electrochemical impedance spectroscopy measurements. The results show that the DSSC based on ZnO/TiO2 film with an optimum concentration of ZnO (3 wt%) shows power conversion efficiency of 8.10%, improved by 28% compared to that of pure TiO2 based solar cell. The increase in efficiency can be attributed to fast electron transport, improve light harvesting efficiency, and enhanced electron collection at photoanodes.