Imaging of contact acoustic nonlinearity using synthetic aperture technique

详细信息    查看全文

• 作者：Dongseok Yun^a ; Jongbeom Kim^a ; Kyung-Young Jhang^b ; ^{kyjhang@hanyang.ac.kr}
• 关键词：Contact acoustic nonlinearity (CAN) ; Contact interface ; Synthetic aperture focusing technique (SAFT) ; Short-time Fourier transform (STFT)
• 刊名：Ultrasonics
• 出版年：2013
• 出版时间：September, 2013
• 年：2013
• 卷：53
• 期：7
• 页码：1349-1354
• 全文大小：1771 K

文摘

The angle beam incidence and reflection technique for the evaluation of contact acoustic nonlinearity (CAN) at solid-solid contact interfaces (e.g., closed cracks) has recently been developed to overcome the disadvantage of accessing both the inner and outer surfaces of structures for attaching pulsing and receiving transducers in the through-transmission of normal incidence technique. This paper proposes a technique for B-mode imaging of CAN based on the above reflection technique, which uses the synthetic aperture focusing technique (SAFT) and short-time Fourier transform (STFT) to visualize the distribution of the CAN-induced second harmonic magnitude as well as the nonlinear parameter. In order to verify the usefulness of the proposed method, a solid-solid contact interface was tested and the change of the contact acoustic nonlinearity according to the increasing contact pressure was visualized in images of the second harmonic magnitude and the relative nonlinear parameter. The experimental results showed good agreement with the previously developed theory identifying the dependence of the scattered second harmonics on the contact pressure. This technique can be used for the detection and improvement of the sizing accuracy of closed cracks that are difficult to detect using the conventional linear ultrasonic technique.