Use of heat pumps in turbogenerator hydrogen cooling systems at thermal power plant

详细信息    查看全文

• 作者：I.D. Anikina^a ; ^{ia.88@mail.ru} ; V.V. Sergeyev^a ; N.T. Amosov^a ; M.G. Luchko^b
• 关键词：Heat pump ; Turbogenerator ; Hydrogen cooling ; Thermal power plant ; Technological cycle ; Technical-and-economic indexes
• 刊名：International Journal of Hydrogen Energy
• 出版年：2017
• 出版时间：5 January 2017
• 年：2017
• 卷：42
• 期：1
• 页码：636-642
• 全文大小：572 K
• 卷排序：42

文摘

The possible increase in heat power generation efficiency was evaluated through this paper via installation of heat pumps for cooling hydrogen in generator of steam turbine.Using the heat pumps, the biggest part of waste heat from turbogenerator hydrogen cooling systems can be transferred to heat supply system. They are used for heat supply in-house load of a power plant or for any other goal of heat supply as well.All calculations were made for thermal power plant at the branch “Nevsky” “TGC-1” company – CHP-21. The analysis was made for heat pumps with heat capacities of 2 MW and 3 MW. The application of such analysis on CHP was applied by the method of detailed settlement estimation of the impact on CHP operating mode with synchronous calculation of characteristics of heat pump. The analysis was made for different operating mode of CHP. A low potential heat source is the water from hydrogen cooling systems of steam turbine generator.The use of heat pumps for steam turbine generator hydrogen cooling system waste heat salvaging is innovation solution to increase TPP cost-performance ratio. On implementing cycle arrangement with heat pump used for sanitary and service makeup water warming, fuel saving is up to 700 toe/year while heat pump system specified heat power is 3 MW.