Ultra-sensitive phenol sensor based on overcoming surface fouling of reduced graphene oxide-zinc oxide composite electrode

详细信息    查看全文

• 作者：Rinky Sha^a ; Sampath Kumar Puttapati^b ; Vadali VSS Srikanth^b ; Sushmee Badhulika^a ; ^{sbadh@iith.ac.in}
• 关键词：Environmental sensors ; Non-enzymatic ; Phenol sensor ; Reduced graphene oxide ; ZnO
• 刊名：Journal of Electroanalytical Chemistry
• 出版年：2017
• 出版时间：15 January 2017
• 年：2017
• 卷：785
• 期：Complete
• 页码：26-32
• 全文大小：1022 K
• 卷排序：785

文摘

A major drawback of non-enzymatic approach for phenol detection is surface fouling which results from the electrochemical oxidation of phenol to polymeric products, thereby restraining the electrode process to low concentrations and limited to single time use. In this work, we report a novel approach for stable, non-enzymatic phenol detection using reduced Graphene Oxide (rGO)-Zinc Oxide (ZnO) composite modified Glassy Carbon Electrode (GCE) which eliminates the surface fouling effect by allowing precise selection of the sensing peak. Here, the rGO-ZnO composite was synthesized using a wet chemical method wherein rGO and ZnO were formed in-situ from GO and Zinc Acetate, respectively. The phenol sensing was investigated by differential pulse voltammetry (DPV) which yielded two peaks at 0.35 V and 0.94 V. Phenol detection was performed at a lower potential (0.35 V) as it eliminates the need for surface renewal of the electrode prior to each scan caused due to surface fouling thus facilitating stable and reproducible detection. The as-fabricated sensor responded linearly to phenol over two ranges, one in the range 2–15 μM with a ultrahigh sensitivity of 1.79 μA/μM cm2 and the other in the range 15–40 μM with a sensitivity of 0.389 μA/μM cm2 with good reproducibility, stability, selectivity and a lower detection limit of 1.94 μM. The sensing ability of rGO-ZnO modified GCE was studied in terms of forward biased nano Schottky barriers at the rGO-ZnO interface. This composite based sensor provides a low cost, non-enzymatic and voltammetric detection of phenol in industrial and environmental analyses.