Gain compensation technique by bias correction in arrays of Silicon Photomultipliers using fully differential fast shaper

详细信息    查看全文

• 作者：M. Baszczyk^a ; ^{baszczyk@agh.edu.pl" class="auth_mail" title="E-mail the corresponding author} ; P. Dorosz^a ; S. Glab^a ; W. Kucewicz^a ; L. Mik^a ; ^b ; M. Sapor^a
• 关键词：SiPM ; MPPC ; Gain compensation ; Bias correction ; Array ; Fully differential
• 刊名：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
• 出版年：2016
• 出版时间：11 July 2016
• 年：2016
• 卷：824
• 期：Complete
• 页码：85-86
• 全文大小：269 K

文摘

Proposed algorithm compensates the gain by changing the bias voltage of Silicon Photomultipliers (SiPM). The signal from SiPM is amplified in fully differential preamplifier then is formed in time by the fully differential fast shaper. The compensation method was tested with four channels common cathode multi-pixel photon counter from Hamamatsu. The measurement system requires only one high voltage power supply. The polarization voltage is adjusted individually in each channel indirectly by tuning the output common mode voltage (VOCM) of fully differential amplifier. The changes of VOCM affect the input voltage through the feedback network. Actual gain of the SiPM is calculated by measuring the mean amplitude of the signal resulting from detection of single photoelectron. The VOCM is adjusted by DAC so as to reach the desired value of gain by each channel individually. The advantage of the algorithm is the possibility to set the bias of each SiPM in the array independently so they all could operate in very similar conditions (have similar gain and dark count rate). The algorithm can compensate the variations of gain of SiPM by using thermally generated pulses. There is no need to use additional current to voltage conversion which could introduce extra noises.