An ecotoxicological study on tin- and bismuth-catalysed PDMS based coatings containing a surface-active polymer

详细信息    查看全文

• 作者：Carlo Pretti ; Matteo Oliva ; Elvira Mennillo ; Martina Barbaglia ; Marco Funel ; Bhaskar Reddy Yasani ; Elisa Martinelli ; Giancarlo Galli
• 关键词：Bismuth catalyst ; Ecotoxicology ; Fouling release ; Coating ; Tin catalyst
• 刊名：Ecotoxicology and Environmental Safety
• 出版年：1 December, 2013
• 年：2013
• 卷：98
• 期：Complete
• 页码：250-256
• 全文大小：509 K

文摘

Novel films were prepared by condensation curing reaction of a poly(dimethyl siloxane) (PDMS) matrix with bismuth neodecanoate and dibutyltin diacetate catalysts. An ecotoxicological study was performed on the leachates of the coatings using the bacterium Vibrio fischeri, the unicellular alga Dunaliella tertiolecta, the crustacean Artemia salina and the fish Sparus aurata (larvae) as testing organisms. A copper-based self-polishing commercial paint was also tested as reference. The results showed that the tin-catalysed coatings and the copper paint were highly toxic against at least two of the four test organisms, whereas bismuth-catalysed coatings did not show any toxic effect. Moreover, the same biological assessment was also carried out on PDMS coatings containing a surface-active fluorinated polymer. The toxicity of the entire polymeric system resulted only from the tin catalyst used for the condensation curing reaction, as the bismuth catalysed coatings incorporating the surface-active polymer remained atoxic toward all the tested organisms.