Constitutive Modeling for Thixoforming of 9Cr18 Semi-solid Alloy and 3D Forecast Mapping
详细信息 查看全文
- 作者：Ya-Ping LI liyapingl226@gmail.comAuthor Vitae ; Ren-bo SONG ; songrb@mater.ustb.edu.cn ; Yong-jin WANG
- 关键词：thixoforming ; constitutive model ; liquid fraction ; thixotropic factor ; 3D forecast
- 刊名：Journal of Iron and Steel Research, International
- 出版年：2016
- 出版时间：December 2016
- 年：2016
- 卷：23
- 期：12
- 页码：1309-1315
- 全文大小：2792 K
- 卷排序：23
文摘
Thixotropic compression tests were carried out on 9Cr18 semi-solid alloy through Gleeble-1500 thermal simulation machine. According to the experiment analysis, macro separation occurred during thixoforming. The liquid film was extruded outside to the surface and solidified to form eutectic structure. The solid particles were connected with each other and underwent plastic deformation. According to the comparison between Zhou-Guan model and modified Zhou-Guan model, it could be observed that the adding of thixotropic factor played an important role in the regression and the latter one was more credible. The modified Zhou-Guan model could well describe the thixoforming behavior. 3D forecast mapping was built for 9Cr18 semi-solid alloy in thixoforming temperature range. It would provide valuable information for selecting process parameters during thixoforming in the manufacture process.