Achieving Single-Nucleotide Specificity in Direct Quantitative Analysis of Multiple MicroRNAs (DQAMmiR)
详细信息 查看全文
- 作者：David W. Wegman ; Farhad Ghasemi ; Alexander S. Stasheuski ; Anna Khorshidi ; Burton B. Yang ; Stanley K. Liu ; George M. Yousef ; Sergey N. Krylov
- 刊名：Analytical Chemistry
- 出版年：2016
- 出版时间：February 16, 2016
- 年：2016
- 卷：88
- 期：4
- 页码：2472-2477
- 全文大小：350K
- ISSN：1520-6882
文摘
Direct quantitative analysis of multiple miRNAs (DQAMmiR) utilizes CE with fluorescence detection for fast, accurate, and sensitive quantitation of multiple miRNAs. Here we report on achieving single-nucleotide specificity and, thus, overcoming a principle obstacle on the way of DQAMmiR becoming a practical miRNA analysis tool. In general, sequence specificity is reached by raising the temperature to the level at which the probe-miRNA hybrids with mismatches melt while the matches remain intact. This elevated temperature is used as the hybridization temperature. Practical implementation of this apparently trivial approach in DQAMmiR has two major challenges. First, melting temperatures of all mismatched hybrids should be similar to each other and should not reach the melting temperature of any of the matched hybrids. Second, the elevated hybridization temperature should not deteriorate CE separation of the hybrids from the excess probes and the hybrids from each other. The second problem is further complicated by the reliance of separation in DQAMmiR on single-strand DNA binding protein (SSB) whose native structure and binding properties may be drastically affected by the elevated temperature. These problems were solved by two approaches. First, locked nucleic acid (LNA) bases were incorporated into the probes to normalize the melting temperatures of all target miRNA hybrids allowing for a single hybridization temperature; binding of SSB was not affected by LNA bases. Second, a dual-temperature CE was developed in which separation started with a high capillary temperature required for proper hybridization and continued at a low capillary temperature required for quality electrophoretic separation of the hybrids from excess probes and the hybrids from each other. The developed approach was sufficiently robust to allow its integration with sample preconcentration by isotachophoresis to achieve a limit of detection below 10 pM.