Vapochromic Luminescence and Flexibility Control of Porous Coordination Polymers by Substitution of Luminescent Multinuclear Cu(I) Cluster Nodes

详细信息    查看全文

• 作者：Takahiro Hayashi ; Atsushi Kobayashi ; Hiroki Ohara ; Masaki Yoshida ; Takeshi Matsumoto ; Ho-Chol Chang ; Masako Kato
• 刊名：Inorganic Chemistry
• 出版年：2015
• 出版时间：September 21, 2015
• 年：2015
• 卷：54
• 期：18
• 页码：8905-8913
• 全文大小：597K
• ISSN：1520-510X

文摘

Two luminescent porous coordination polymers (PCPs), i.e., [Cu₂(渭₂-I)₂ctpyz]_n and [Cu₄(渭₃-I)₄ctpyz]_n (Cu2 and Cu4, respectively; ctpyz = cis-1,3,5-cyclohexanetriyl-2,2鈥?2鈥?tripyrazine), were successfully synthesized and characterized by single-crystal X-ray diffraction and luminescence spectroscopic measurements. Cu2 consists of rhombus-type dinuclear {Cu₂I₂} cores bridged by ctpyz ligands, while Cu4 is constructed of cubane-type tetranuclear {Cu₄I₄} cores bridged by ctpyz ligands. The void fraction of Cu4 is estimated to be 48.0%, which is significantly larger than that of Cu2 (19.9%). Under UV irradiation, both PCPs exhibit red luminescence at room temperature in the solid state (位_em values of 660 and 614 nm for Cu2 and Cu4, respectively). Although the phosphorescence of Cu2 does not change upon removal and/or adsorption of EtOH solvent molecules in the porous channels, the solid-state emission maximum of Cu4 red-shifts by 36 nm (位_em = 650 nm) upon the removal of the adsorbed benzonitrile (PhCN) molecules from the porous channels (and vice versa). This large difference in the vapochromic behavior of Cu2 and Cu4 is closely related to the framework flexibility. The framework of Cu2 is sufficiently rigid to retain the porous structure without solvated EtOH molecules, whereas the porous structure of Cu4 collapses easily after removal of the adsorbed PhCN molecules to form a nonporous amorphous phase. The original vapor-adsorbed porous structure of Cu4 is regenerated by exposure of the amorphous solid to not only PhCN vapor but also tetrahydrofuran, acetone, ethyl acetate, and N,N-dimethylformamide vapors. The Cu4 structures with the various adsorbed solvents showed almost the same emission maxima as the original PhCN-adsorbed Cu4, except for DMF-adsorbed Cu4, which showed no luminescence probably because of weak coordination of the DMF vapor molecules to the Cu(I) centers of the tetranuclear {Cu₄I₄} core.