Formation of Iron Nanoparticles and Increase in Iron Reactivity in Mineral Dust during Simulated Cloud Processing

详细信息    查看全文

• 作者：Zongbo Shi ; Michael D. Krom ; Steeve Bonneville ; Alex R. Baker ; Timothy D. Jickells ; Liane G. Benning
• 刊名：Environmental Science & Technology
• 出版年：2009
• 出版时间：September 1, 2009
• 年：2009
• 卷：43
• 期：17
• 页码：6592-6596
• 全文大小：199K
• 年卷期：v.43,no.17(September 1, 2009)
• ISSN：1520-5851

文摘

The formation of iron (Fe) nanoparticles and increase in Fe reactivity in mineral dust during simulated cloud processing was investigated using high-resolution microscopy and chemical extraction methods. Cloud processing of dust was experimentally simulated via an alternation of acidic (pH 2) and circumneutral conditions (pH 5−6) over periods of 24 h each on presieved (<20 μm) Saharan soil and goethite suspensions. Microscopic analyses of the processed soil and goethite samples reveal the neo-formation of Fe-rich nanoparticle aggregates, which were not found initially. Similar Fe-rich nanoparticles were also observed in wet-deposited Saharan dusts from the western Mediterranean but not in dry-deposited dust from the eastern Mediterranean. Sequential Fe extraction of the soil samples indicated an increase in the proportion of chemically reactive Fe extractable by an ascorbate solution after simulated cloud processing. In addition, the sequential extractions on the Mediterranean dust samples revealed a higher content of reactive Fe in the wet-deposited dust compared to that of the dry-deposited dust. These results suggest that large variations of pH commonly reported in aerosol and cloud waters can trigger neo-formation of nanosize Fe particles and an increase in Fe reactivity in the dust.