Energetic-Assisted Scanning Thermal Lithography for Patterning Silver Nanoparticles in Polymer Films
详细信息 查看全文
- 作者：Chun-Min Huang ; Chung-Hsien Yeh ; Lung Chen ; De-An Huang ; Changshu Kuo
- 刊名：ACS Applied Materials & Interfaces
- 出版年：2013
- 出版时间：January 9, 2013
- 年：2013
- 卷：5
- 期：1
- 页码：120-127
- 全文大小：459K
- 年卷期：v.5,no.1(January 9, 2013)
- ISSN：1944-8252
文摘
Energetic-assisted scanning thermal lithography (SThL) was demonstrated with the addition of benzoyl peroxide (BPO) for patterning silver nanoparticles. SThL samples were prepared by spin-coating poly(methyl methacrylate) (PMMA) thin films preloaded with BPO and silver nitrate precursors. Localized thermal analysis via probe heating demonstrated that the BPO decomposition in the polymer film took place at the temperature of 80 掳C. Above this temperature, the thermal probe initiated the decomposition of the peroxide, which resulted in the in situ discharge of exothermal energy to compensate the joule shortage and the rapid cooling in the SThL thin film samples. The additional joule energy thermally enhanced the synthesis of silver nanoparticles, which were patterned and embedded in the PMMA thin film. Surface plasmon resonance scattering of these silver nanoparticles was observed by dark-field optical microscopy, whereas the nanoparticle distribution was examined by transmission electron microscopy. Variations in the scanning probe temperatures and peroxide concentrations were carefully investigated to optimize the thermal lithography efficiency upon the addition of energetics.