Fiber Containment for Improved Laboratory Handling and Uniform Nanocoating of Milligram Quantities of Carbon Nanotubes by Atomic Layer Deposition

详细信息    查看全文

• 作者：Christina K. Devine ; Christopher J. Oldham ; Jesse S. Jur ; Bo Gong ; Gregory N. Parsons
• 刊名：Langmuir
• 出版年：2011
• 出版时间：December 6, 2011
• 年：2011
• 卷：27
• 期：23
• 页码：14497-14507
• 全文大小：1340K
• 年卷期：v.27,no.23(December 6, 2011)
• ISSN：1520-5827

文摘

The presence of nanostructured materials in the workplace is bringing attention to the importance of safe practices for nanomaterial handling. We explored novel fiber containment methods to improve the handling of carbon nanotube (CNT) powders in the laboratory while simultaneously allowing highly uniform and controlled atomic layer deposition (ALD) coatings on the nanotubes, down to less than 4 nm on some CNT materials. Moreover, the procedure yields uniform coatings on milligram quantities of nanotubes using a conventional viscous flow reactor system, circumventing the need for specialized fluidized bed or rotary ALD reactors for laboratory-scale studies. We explored both fiber bundles and fiber baskets as possible containment methods and conclude that the baskets are more suitable for coating studies. An extended precursor and reactant dose and soak periods allowed the gases to diffuse through the fiber containment, and the ALD coating thickness scaled linearly with the number of ALD cycles. The extended dose period produced thicker coatings compared to typical doses on CNT controls not encased in the fibers, suggesting some effects due to the extended reactant dose. Film growth was compared on a range of single-walled NTs, double-walled NTs, and acid-functionalized multiwalled NTs, and we found that ultrathin coatings were most readily controlled on the multiwalled NTs.