Laser Ablative Surface Treatment for Enhanced Bonding of Ti-6Al-4V Alloy
详细信息 查看全文
- 作者：Frank L. Palmieri ; Kent A. Watson ; Guillermo Morales ; Thomas Williams ; Robert Hicks ; Christopher J. Wohl ; John W. Hopkins ; John W. Connell
- 刊名：ACS Applied Materials & Interfaces
- 出版年：2013
- 出版时间：February 27, 2013
- 年：2013
- 卷：5
- 期：4
- 页码：1254-1261
- 全文大小：519K
- 年卷期：v.5,no.4(February 27, 2013)
- ISSN：1944-8252
文摘
Adhesive bonding offers many advantages over mechanical fastening, but requires certification before it can be incorporated in primary structures for commercial aviation without disbond-arrestment features or redundant load paths. Surface preparation is widely recognized as the key step to producing robust and predictable adhesive bonds. Surface preparation by laser ablation provides an alternative to the expensive, hazardous, polluting, and less precise practices used currently such as chemical-dip, manual abrasion and grit blast. This report documents preliminary testing of a surface preparation technique using laser ablation as a replacement for the chemical etch and abrasive processes currently applied to Ti-6Al-4V alloy adherends. Surface roughness and surface chemical composition were characterized using interference microscopy and X-ray photoelectron spectroscopy, respectively. A technique for fluorescence visualization was developed which allowed for quantitative failure mode analysis. Wedge crack extension testing in a hot, humid environment indicated the relative effectiveness of various surface treatments. Increasing ablation duty cycle reduced crack propagation and adhesive failure. Single lap shear testing showed an increase in strength and durability as laser ablation duty cycle and power were increased. Chemical analyses showed trends for surface chemical species, which correlated with improved bond strength and durability.