Use of an Accelerometer and a Microphone as Gas Detectors in the Online Quantitative Detection of Hydrogen Released from Ammonia Borane by Gas Chromatography

详细信息    查看全文

• 作者：Yi-San He ; Kuan-Fu Chen ; Chien-Hung Lin ; Min-Tsung Lin ; Chien-Chung Chen ; Cheng-Huang Lin
• 刊名：Analytical Chemistry
• 出版年：2013
• 出版时间：March 19, 2013
• 年：2013
• 卷：85
• 期：6
• 页码：3303-3308
• 全文大小：350K
• 年卷期：v.85,no.6(March 19, 2013)
• ISSN：1520-6882

文摘

The use of an accelerometer as a gas detector in gas chromatography (GC) is described for the first time. A milli-whistle was connected to the outlet of the GC capillary. When the eluted and GC carrier gases pass through the capillary and milli-whistle, a sound is produced. After a fast Fourier transform (FFT), the sound wave generated from the milli-whistle is picked up by a microphone and the resulting vibration of the milli-whistle body can be recorded by an accelerometer. The release of hydrogen gas, as the result of thermal energy, from ammonia borane (NH₃BH₃), which has been suggested as a storage medium for hydrogen, was selected as the model sample. The findings show that the frequencies generated, either by sound or by the vibration from the whistle body, were identical. The concentration levels of the released hydrogen gas can be determined online, based on the frequency changes. Ammonia borane was placed in a brass reservoir, heated continually, and the released hydrogen gas was directly injected into the GC inlet at 0.5 min intervals, using a home-built electromagnetic pulse injector. The concentration of hydrogen for each injection can be calculated immediately. When the ammonia borane was encapsulated within a polycarbonate (PC) microtube array membrane, the temperature required for the release of hydrogen can be decreased, which would make such a material more convenient for use. The findings indicate that 1.0 mg of ammonia borane can produce hydrogen in the range of 1.0鈥?.25 mL, in the temperature range of 85鈥?15 掳C.