Quantification of Functional Groups and Modeling of Their Ionization Behavior in the Active Layer of FT30 Reverse Osmosis Membrane

详细信息    查看全文

• 作者：Orlando Coronell ; Benito J. Mariñ ; as ; Xijing Zhang ; David G. Cahill
• 刊名：Environmental Science & Technology
• 出版年：2008
• 出版时间：July 15, 2008
• 年：2008
• 卷：42
• 期：14
• 页码：5260 - 5266
• 全文大小：1375K
• 年卷期：v.42,no.14(July 15, 2008)
• ISSN：1520-5851

文摘

A new experimental approach was developed to measure the concentration of charged functional groups (FGs) in the active layer of thin-film composite reverse osmosis (RO) and nanofiltration (NF) membranes as a function of solution pH. FT30 RO membrane, with a fully aromatic polyamide (PA) active layer sandwiched between a polysulfone support and a coating layer, was used. The experiments consisted of saturating charged FGs with heavy ion probes, and determining the ion probe concentration by Rutherford backscattering spectrometry (RBS). Deprotonated carboxylic groups were saturated with Ag⁺, and protonated amine groups with WO₄²⁻. The ionization behavior of carboxylic and amine groups was modeled based on acid−base equilibrium theory. While the ionization behavior of amine groups was satisfactorily described by one dissociation constant (pK_a = 4.74), two pK_a values (5.23 and 8.97) were necessary to describe the titration curve of carboxylic groups. These results were consistent with the bimodal pore size distribution (PSD) of FT30 active layer reported in the literature. The calculated total concentrations of carboxylic and amine groups in the active layer of the FT30 RO membrane studied were 0.432 and 0.036 M, respectively, and the isoelectric point (IEP) was 4.7. The total concentration of carboxylic and amine groups revealed that the degree of cross-linking of the PA active layer of the FT30 RO membrane studied was 94%.