Enhanced Barrier Performance of Engineered Paper by Atomic Layer Deposited Al2O3 Thin Films

详细信息    查看全文

• 作者：Mehr Negar Mirvakili ; Hao Van Bui ; J. Ruud van Ommen ; Savvas G. Hatzikiriakos ; Peter Englezos
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：June 1, 2016
• 年：2016
• 卷：8
• 期：21
• 页码：13590-13600
• 全文大小：748K
• 年卷期：0
• ISSN：1944-8252

文摘

Surface modification of cellulosic paper is demonstrated by employing plasma assisted atomic layer deposition. Al₂O₃ thin films are deposited on paper substrates, prepared with different fiber sizes, to improve their barrier properties. Thus, a hydrophobic paper is created with low gas permeability by combining the control of fiber size (and structure) with atomic layer deposition of Al₂O₃ films. Papers are prepared using Kraft softwood pulp and thermomechanical pulp. The cellulosic wood fibers are refined to obtain fibers with smaller length and diameter. Films of Al₂O₃, 10, 25, and 45 nm in thickness, are deposited on the paper surface. The work demonstrates that coating of papers prepared with long fibers efficiently reduces wettability with slight enhancement in gas permeability, whereas on shorter fibers, it results in significantly lower gas permeability. Wettability studies on Al₂O₃ deposited paper substrates have shown water wicking and absorption over time only in papers prepared with highly refined fibers. It is also shown that there is a certain fiber size at which the gas permeability assumes its minimum value, and further decrease in fiber size will reverse the effect on gas permeability.